| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | type Parameters |
Parameters of F-1300 drilling pump | Parameters of F-1600 drilling pump |
| 1 | Form | Horizontal triplex single-acting piston pump | |
| 2 | Rated input power KW(hp) | 960(1300) | 1180(1600) |
| 3 | Stroke length×Max. cylinder liner diameter | 305×180mm(12×7.0867) | |
| 4 | Rated strokes | 120SPM | |
| 5 | Lubrication | Positive and spray lubrication | |
| 6 | Key connection size | 50.8×50.8mm(2×2) | |
| 7 | Pump weight | 25850kg/56959Ib | 25850kg/56959Ib |
| Strokes per minute (SPM) |
Diameter of cylinder liner and rated pressure | ||||
| F-1300 | 7″178mm 2786 19.2 psi MPa | 6 3/4″171mm 2998 20.6 psi MPa |
6 1/2″165mm 3230 22.2 psi MPa |
6″152mm 3792 26.1 psi MPa |
|
| F-1600 | 3429 23.6 psi MPa | 3689 25.4 psi MPa |
3977 27.4 psi MPa |
4667 32.2 psi MPa |
|
| Nominal power | Displacement | ||||
| LSF-1300 | LSF-1600 | ||||
| 130 | 1408 hp 1049 kw |
1733 hp 1292 kw | 780 GPM 49.19 L/S | 725 GPM 45.74 L/S |
672 GPM 42.41 L/S |
| 120 | 1300 hp 969 kw |
1600 hp 1193 kw | 720 GPM 45.41 L/S | 669 GPM 42.22 L/S |
621 GPM 39.15 L/S |
| 110 | 1191 hp 888 kw |
1466 hp 1091 kw | 660 GPM 41.62 L/S | 613 GPM 38.70 L/S |
569 GPM 35.89 L/S |
High Efficiency & Wear Resistance
Made of high-chromium alloy or rubber-lined materials, critical components (e.g., cylinder liners, pistons, valves) undergo specialized hardening treatment to withstand abrasive particle media.
High Pressure & Large Flow Rate
Tiered pressure options (0.5-30MPa available) with flow rates ranging from 50-3000L/min to meet diverse operational demands.
Strong Adaptability
Capable of handling slurries with solid content ≤60% and density ≤2.5g/cm³. Some models support acid/alkali resistance or high-temperature (≤120°C) media.
Stable & Reliable
Heavy-duty bearing structure + hydraulic balancing system minimizes vibration. Equipped with safety valves and pressure gauges to prevent overload.
Main Types |
||
| Type | Applications | Advantages |
|---|---|---|
| Triplex Plunger Pump | Oil drilling, high-pressure grouting | Low pulsation, stable pressure |
| Centrifugal Mud Pump | Mining tailings, river dredging | High flow rate, easy maintenance |
| Piston Mud Pump | High-viscosity slurry (ceramics/chemicals) | High pressure, excellent sealing |
Prior to delivery, the F-series drilling pumps undergo full assembly and operational load testing at our manufacturing facilities. The power end lubrication oil is drained after testing.
Before putting the pump into service, all assembly and inspection procedures must be performed under the following safety precautions: To prevent personal injury during maintenance or inspection, the equipment must be powered off, and all protective devices on the drive motor and transmission components must be secured in the safety position.
1.Pump Installation
The LSF series drilling pump can be mounted on standard bases compatible with various pump types. Note that while the box-structured power end framework offers substantial bending resistance, its torsional strength is comparatively limited. Consequently, the supporting foundation must maintain perfect horizontality and possess adequate load-bearing capacity to sustain both the pump's static weight and operational dynamic loads.
2.Ground Installation
For ground-mounted applications, position eight 76×305mm support plates beneath the pump base, aligning them longitudinally with the base frame (refer to Fig.1 for precise placement). The underlying foundation should extend at least 300mm beyond the pump base perimeter on all sides. In marshy or high-moisture environments, enhanced foundation reinforcement is required.
3.Permanent Installation
When permanently installing on marine drilling vessels or platforms, anchor the pump to either steel structural bases or concrete foundations using mounting bolts. Critical attention must be paid to proper shimming beneath the pump base to eliminate potential torsional stresses or framework deformation. Ensure full contact between the pump base and all support timbers when bolts are in the un-tightened state.
For shipboard installations where the pump base connects to T-beam structures (see Fig.1 & Fig.2), particular care must be taken in timber placement to prevent base distortion or subsidence. All support timbers must exceed the T-beam's flange width, with a minimum required length of 305mm.
For comprehensive guidance, consult the complete Operation Instruction Manual.
1) Are you trading company or manufacturer?
We are professional manufacturer with 16 years export experience , and mainly products are oil drilling rig and its spare parts, drilling mud pump, related oilfield drilling equipment, construction machinery,
water well drilling rig and etc. Our products have been exported to more than 20 countries of Azerbaijan, Kazakhstan, Asia, South
America, Africa, India, Egypt, and get a good reputation in the world.
2) Are your products qualified?
Yes, our products all have gained ISO certificate,API, and CE, Ghost, and we have specialized quality inspection department for
checking every machine before leaving our factory.
3) How about your machine quality?
All of our machines must pass a great number of strict testing in order to offer the best quality to our customers.
4) Do you have after-sale service?
Yes, we have professional technic after-sale service team which will offer you the best technical maintenance guidance. Engineers
are available to be abroad for service.
5) What about the quality warranty?
We offer one-year quality warranty.
6) How long can you deliver the machine?
Generally, parts mainly have at stock , pumps we can delivery in 20 working days.
){kind=link}